Pneumatic Press “C” Frame
Our Power presses covers the whole range of pressing and forming operations. The press frame is made in one single piece weld body and is shaped like a ‘C’. These pneumatic press C frame are mostly employed for blanking, piercing, stamping, bending trimming and clinching operations. Power Presses what we are manufacture is of steel fabricated frame, using best raw materials that are tested for long life, efficiency and reliability. We also do stress relieving to all fabricated frames and follows standard practice of seasoning casting. These presses are provided with pedal operated rolling key clutch. We also manufacture customized Pneumatic “C” Frame Power Presses as per client requirements.
Features
- Capacity Ranging from 5 to 315 Tons.
- This C-Type press features one piece frame of rolled steel plates, carefully proportioned and Mig welded for maximum strength and rigidity.
- Crankshaft from high carbon steel.
- Crank pins are extra large to minimize deflection and to provide wide bearing areas.
- The press is equipped with Rolling key clutch with repeated and non-repeated safety device.
| Capacity Tons | 5 | 10 | 20 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 315 | |
| Table Size | 350×300 | 435×350 | 500×375 | 600×400 | 625×475 | 700×550 | 900×600 | 1000×700 | 1150×800 | 1200×850 | 1350×950 | |
| Distance Between Bed of Ram (SUAU) | 210 | 280 | 300 | 360 | 400 | 425 | 455 | 500 | 550 | 600 | 700 | |
| Slide Stroke Length Adjustable or Fix | 40 | 50 | 65 | 85 | 100 | 110 | 125 | 125 | 150 | 150 | 175 | |
| Adjustment of Slide | 25 | 25 | 28 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 75 | |
| Shank Hole | 25 | 28 | 30 | 35 | 40 | 45 | 50 | 55 | 63 | 65 | 70 | |
| No. of Slide Strokes | 55 | 50 | 50 | 45 | 45 | 40 | 40 | 35 | 30 | 30 | 25 | |
| Main Motor | 1/1440 | 2/1440 | 2/1440 | 3/1440 | 5/1440 | 7.5/1440 | 10/1440 | 15/1440 | 20/1440 | 25/1440 | 30/1440 | |
| Motor Pulley Dia | B-2.5 | B-3 | B-3 | B-4 | B-5 | B-6 | B-7 | B-7 | C-8 | C-8 | C-9 | |
| Height from Floor to top ok Bolster | 625 | 325 | 675 | 700 | 725 | 750 | 775 | 825 | 825 | 825 | 850 | |
| Bed Openind (Dia) | 75 | 100 | 100 | 125 | 150 | 175 | 200 | 225 | 250 | 275 | 300 | |
| Req.air pressure for pneumatic clutch ( Kg/Cm2) | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | |
| Optional Die Cushion | Capacity | – | 1.6 | 1.6 | 3.0 | 5.0 | 7.5 | 10.0 | 15.0 | 20.0 | 25.0 | 30 |
| Stroke Length | – | 25 | 25 | 45 | 65 | 75 | 85 | 100 | 110 | 110 | 120 | |
| Air Pressure (Kg/Cm2) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
- Specifications are subject to change without Prior Notice.
- All Data is proposal and can be adjusted according to Customer’s Requirements.
Summary
Author Rating
Aggregate Rating
4.5 based on votes
Brand Name
NKH Hammers
Product Name
Pneumatic Press “C” Frame